1. Room Preparation
Due to Health & safety and insurance restriction, we respectfully ask you to move all furniture and breakable items. Our craftsmen will then carefully protect skirting Boards and wall coverings, using low tack tape, waterproof plastic or waxed paper.
2. Dry Mop
Dry mopping all of areas to be treated.
3. Vacuum floor
Power vacuuming using HEPA filtration vacuum cleaners ensuring the removal of loose dirt, sand and dust. Making sure all the edges are dust free using edge nozzles.
Application of our unique Wax & Residue Remover stripping solution which will break down And remove seal/polish build-ups. Then using various grades of brushes / pads and agitation machinery We clean deep down in to the surface. Followed by, pressurized water extraction using enclosed spinning heads, providing unrivalled cleaning results.
5. Neutralize the floor
Application of low P.H. rinse this will neutralise the floor ready for further.
Install turbo dryers to speed dry the floors.
7. Dry Burnishing
Dry burnish with an ultra high- speed rotary machine fitted with a red floor pad.
Hand application of our reactive Co Polymer hi bonding Amtico & Karndean Polish which has Been specially designed to protect and enhance floors, this process is vital. This process could take a number of hours, as the floor has to be completely dry prior to application In addition, the floor has to be dry when applying the recommended coats of sealer. This will protect your flooring in the future, guarding against spots and spills, and of course, your daily maintenance of the floor will be greatly improved.
9. Dry burnishing
Dry burnishing with an ultra high-speed rotary machine fitted with a red floor pad, this Process will bond the floor finish to the surface.
As every flooring surface is different and some surface are high maintenance, Anyfloor will Continue to assist you with on floor maintenance, ensuring your floor look good at all times.